For use as a primer before hanging wallcovering.
Developed specifically for hotel/motel commercial, industrial, and residential renovations.
Directions: Clean surface to be coated if needed. Barrier Shield Coat must be covered or top coated.
Shake well before using by turning can upside down and shaking back and forth in a circular motion until all
sedimentation is in solution. For Barrier Shield Coat to work, these directions must be followed.
Application: Apply with sponge by hand, airless sprayer, brush, or roller .
Apply generous coat and allow to dry on surface. On hard interior surfaces such as wood/plastic
furniture, cabinets, paneling, etc., it is best to wipe on. Pour Barrier Shield Coat into a small pail.
Each time cloth is dipped, stir contents. Wipe on thin coat. On other conspicuous surfaces that are
sprayed, if there are any runs, they should be wiped smooth with a sponge or brush containing Barrier Shield Coat.
|
For use as a primer before hanging wallcovering or as a clear matte finish top coat.
Directions: Clean surface to be coated if needed. Top Shield Coat dries to a
clear matte finish and any spots on the surface will show through coating. Shake well before using
by turning can upside down and shaking back and forth in a circular motion until all sedimentation
is in solution. For Top Shield Coat to work, these directions must be followed.
Application: Apply with sponge by hand, airless sprayer, brush, or roller. Apply
generous coat and allow to dry on surface. On hard interior surfaces such as wood/plastic furniture,
cabinets, paneling, etc., it is best to wipe on. Pour Top Shield Coat into a small pail. Each time
cloth is dipped, stir contents. Wipe on thin coat. On other conspicuous surfaces that are sprayed,
if there are any runs, they should be wiped smooth with a sponge or brush containing Top Shield Coat.
|
