Barrier Coat 100
For use as a primer before hanging wallcovering.
Developed specifically for hotel/motel commercial, industrial,
and residential renovations.
Directions: Clean surface to be coated if needed.
Mildew Shield Barrier Coat must be covered or top coated.
Shake well before using by turning can upside down and shaking back and forth
in a circular motion until all sedimentation is in solution. For Mildew Shield
to work, these directions must be followed.
Application: Apply with sponge by hand, airless sprayer,
brush, or roller ( see Technical Specifications ). Apply generous
coat and allow to dry on surface. On hard interior surfaces such as wood/plastic furniture, cabinets,
paneling, etc., it is best to wipe on. Pour Mildew Shield into a small pail. Each
time cloth is dipped, stir contents. Wipe on thin coat. On other conspicuous surfaces that are sprayed,
if there are any runs, they should be wiped smooth with a sponge or brush containing
Mildew Shield.
Top Coat 101
For use as a primer before hanging wallcovering or as a clear matte finish top coat.
Directions: Clean surface to be coated if needed. Mildew Shield dries to a
clear matte finish and any spots on the surface will show through coating. Shake well before using by turning
can upside down and shaking back and forth in a circular motion until all sedimentation is in solution.
For Mildew Shield to work, these directions must be followed.
Application: Apply with sponge by hand, airless sprayer, brush, or roller.
Apply generous coat and allow to dry on surface. On hard interior surfaces such as wood/plastic
furniture, cabinets, paneling, etc., it is best to wipe on. Pour Mildew Shield into a
small pail. Each time cloth is dipped, stir contents. Wipe on thin coat. On other conspicuous surfaces that
are sprayed, if there are any runs, they should be wiped smooth with a sponge or brush containing
Mildew Shield.
|
|
|
